Clean and smooth the wall well; use a wallpaper primer-sealer; select paper-appropriate adhesive for the weight of your paper; roll out bubbles from the center of the wall toward the edges; keep indoor conditions even during drying. R&R Painting and Wallpaper LLC can help ensure proper wallpaper preparation and installation.
The Frustration of Wallpaper Defects
Wallpaper can turn your bedroom, lounge, or kitchen into an absolute wow! Wall, creating great texture and character and covering the most boring of walls. But little compared to the annoyance of stumbling out of bed the day after hanging your wallpaper only to find unsightly bubbles, lifts, and seams.
Air Bubbles and Lifting Borders While you might panic when you see air bubbles or a loose border, there are simple physical explanations behind these problems. Once you understand why your wallpaper bubbles or lifts, you can patch up small problems and avoid big mistakes next time around.
Why is my wallpaper bubbling?
They will usually manifest as little areas of roundedness all over the bulk of the paper either immediately after putting up the paper or during the process of it drying.
1. Trapped Air Pockets and Improper Smoothing
Air pockets can be caused when you smooth out the wallpaper unevenly on the surface of the wall.
● The Air Smoothing Technique is Wrong: Smoothing from the edges inward causes pockets of trapped air between the paper and the backing.
● Over-Stretching: Over-stretching or dragging paper into position draws the surface tension out of the paper. This causes the paper to lift off the surface when the adhesive has dried.
2. Moisture and Drying Dynamics
Of primary importance is the relationship between the wall moisture levels and the drying time of the paste.
● Normal Expansion Bubbles: Many woven wall coverings are designed to expand when pasted and then shrink back as they dry. As a result, small, flat bubbles will usually self-vent within 24-48 hours once the water has evaporated.
● Unsealed Wall Absorption: Unprimed drywall takes in moisture too fast from the paste, preventing the paste from adhering uniformly to the surface and causing the paper to bubble.

Why Does My Wallpaper Lift and Peel at the Seams
Lifting and peeling tend to take place at the top edges and corners or on the vertical seams, rather than in the center of a strip.
3. Adhesive Errors and Poor Wall Prep
Almost all lifting edges are associated with either substandard surface prep or uneven paste application.
● Poor Paste Coverage: Not applying paste along a sheet’s perimeter results in that area not being bonded. When the paper dries and contracts a bit, the dry margins will lift away from the wall.
● Dust, Grease, or Gloss: If you want to paste wallpaper on a painted wall, make sure the surface is not a high-gloss finish, glazed, or coated in any manner. The paste has nothing to hold on to if you paste on a glossy surface after you’ve cleaned off all the gloss!
4. Humidity and Environmental Factors
The environment in the room will influence the duration for which the wallpaper is attached.
● Higher Room Humidity: Applying non-breathable wallpaper to a kitchen or bathroom with inadequate ventilation can, over time, cause the moist steam to decompose the water-based adhesives.
● Severe temperature fluctuations: Heating systems or air conditioners drying wallpaper can force the surface to dry faster than the adhesive underneath, opening the seams.
Why Hire Professionals for Wallpaper Installation?
Getting your wallpaper hung right is a complex task that involves a lot of prep, pattern work, and chemistry.
● Professional Wall Prep and Priming: Expert paperhangers examine, correct, sand, and seal walls with primers designed to produce optimum paste bonds.
● Expertise on Various Wall Coverings: Whether using heavy vinyl non-wovens, fragile grass cloths, or wet-and-pasted wallpaper, certified installers know which adhesives and booking times each type demands.
● Precise Seam Pattern Matching and Edge Scalloping: An artful installer performs tight seam joints around switches, sills, and irregular corners without pulling or tearing light, fragile rolls.
Give the Wallcovering Time to Settle
After installation, avoid hanging pictures, moving furniture against the wall, or cleaning the wallpaper immediately. Allowing the adhesive to cure without disturbance gives the wallcovering time to settle properly and helps protect the finished surface from unnecessary marks or movement. For a professional finish, Wallpaper Installation in Santa Barbara, CA can help ensure the material is handled and installed correctly from the start.
Conclusion
What causes bubbles and lifts in wallpaper? Bubbles and lifts in wallpaper are typically caused by air that is trapped in the wallpaper or by improper wall preparation, improper paste application, or excessive humidity in the room. While slight, flat expansions will often flatten as the paste dries, lifts, and laps that persist will often be the result of an adhesive failure.
When you use wallpaper primer-sealers, apply the correct paste for your wallcovering, and take proper installation methods, you can enjoy a bubble-free wallcovering surface for years.
FAQs
Should I pop wallpaper bubbles right away?
No. Wait 24 to 48 hours first. Many small expansion bubbles shrink and disappear naturally as the adhesive cures and the paper contracts.
How do I fix a large bubble that won’t go away after drying?
Slit the bubble carefully with a razor blade, inject a small dab of wallpaper adhesive using a paste syringe, smooth it flat with a roller, and wipe away excess glue.
What is the best way to fix lifting wallpaper seams?
Apply a thin layer of seam adhesive behind the lifted edge using a small artist brush, and press the paper firmly against the wall.
Do I really need to use a wallpaper primer before hanging wallpaper?
Yes. Wallpaper primer seals porous drywall, prevents the wall from drying out paste prematurely, and allows paper to be removed safely in the future without damaging drywall.
Can high bathroom humidity cause wallpaper to peel off?
Yes. Steam and high moisture break down standard water-based pastes over time, which is why bathrooms require water-resistant wallpaper paste and proper ventilation.